Pages Navigation Menu

Chemical Engineering Labs

4 Advantages Of AODD Pumps

Posted by on Nov 3, 2014 in Uncategorized | 0 comments

AODD pumps (air operated, double diaphragm pumps) are pumps that use two diaphragms powered by air, rather than electricity. They are increasingly being used in harsh pumping conditions, such as extreme heat or cold, because of their lack of parts that need to be wet in order to run, as well as their overall versatility. There are several different advantages associated with using AODD pumps that make them extremely apt to run in inclement weather conditions. 1. They Can Run Dry This is utterly critical because most pumps are not able to run without some sort of fluid being in their system. When these pumps that require water or other fluid are used in extremely cold environments, they require additional measures, such as a heated blanket or extra levels of insulation, to make sure that the fluids don’t freeze. With an AODD pump, because it can run dry, there is no need to take these precautions and deal with the additional hassle and expense. 2. They Can Pump Fluids of Any Thickness Being able to pump either thick or thin fluids is also critical for pump that is working in extreme conditions. The fluids that are pumping through the system will get thicker as the temperature around them drops. Pumps that can only pump thin fluids will not be able to handle this change and lose efficiency. AODD pumps will not. 3. Their Pressure and Flow Can Be Turned down with No Repercussions Many pumps are not able to handle the flow or pressure being reduced. AODD pumps are able to maintain full efficiency even with this reduction. It is often better for the parts in the pump to be run consistently and slowly because it does not wear the equipment out as quickly, thus maintaining the lifespan of the pump. Because they can be run slowly, AODD pumps tend to require less maintenance.  4. They Are Portable In harsh conditions, it is common for a pump to only be needed for a short period of time, since most companies will try to vacate such conditions as soon as possible to reduce costs. If a pump is large and heavy, it can be expensive to put up, take down, and transfer. AODD pumps are easy to pack up and take somewhere else, allowing them to be used quickly for short periods of time without any long setup.  Take these advantages into consideration and decide if an AODD pump is right for your needs. For more information, contact a company like Small & Sons Oil Dist...

read more

Dumpster Placement Tips For Home Remodelers

Posted by on Oct 31, 2014 in Uncategorized | 0 comments

Homeowners involved in any type of remodeling project have a lot of decisions to make, such as what to do with all of that construction debris. Hauling it to a landfill takes a lot of time and effort that could be better spent on other tasks. The best option is to have a dumpster rental firm, such as Bay Disposal Inc., place a roll-off container, or bin, on your site. You can’t just put a dumpster anywhere, however. Here are a few tips for selecting a good location for your rental trash bin. Concrete Drive Perhaps the best spot for a dumpster is a concrete driveway. These types of driveways can typically handle heavy loads without suffering any damage. Watch out for any overhead wires or cables from utility companies. Also, make sure that no branches from nearby shrubbery or trees hang over the drive. These obstacles can be a safety hazard, impeding the truck driver from accurately setting down the dumpster. Asphalt Drive Asphalt drives are also a good choice for a placement location, but they have some key differences compared to concrete driveways. Asphalt is not as hard as concrete and is more vulnerable to damage from the weight of the bin. This is especially true during hot weather. To avoid having the dumpster harm the asphalt surface, place sections of plywood under the container. In some cases, the dumpster company will do this for you if asked. Street Location If you have a small property, or no suitable driveway, you might consider placing the dumpster on the street. Because this is public property, you will need the permission of the local authorities. In most cases, you will need to apply for a permit and may be required to pay a fee as well. There may also be restrictions on the street placement, such as forbidding the dumpster to impede a sidewalk or alley. Ground Site Although perhaps not the ideal location, locating the container on the ground is another possibility. Keep in mind, however, that a heavy dumpster can sink in soft ground. Select a spot where the ground is firm and that the dumpster truck can access easily. Also, avoid placing the dumpster on the ground if rain is in the forecast, since this can soften the soil and cause the container to sink. Using a dumpster to deal with your construction debris issues is a great idea, as long as you realize that bin placement needs to be planned carefully. Contact your local dumpster rental company for more...

read more

From Start To Finish: The Hardwood Floor Installation Process

Posted by on Oct 31, 2014 in Uncategorized | 0 comments

As a brand new homeowner, you are excited about moving into your home. You are interested in upgrading the interior to include a new dishwasher, a spacious deck, and hardwood flooring to match your furnishings. The dishwasher and the deck are relatively easy to install. But the flooring poses a problem. You want to install it yourself to save on costs, but there are so many different types of wood available that it is difficult to decide how to go about it. Additionally, there is such a variety of nails to use that you find your head swimming with all the choices before you. Relax! Below is some advice to help you install your hardwood flooring in a safe, easy fashion. The Wood The most common types of wood chosen for in-home flooring are maple, oak, and bamboo. The advantages of each type of wood are described below: Maple is a very dense wood. The density protects the wood from nicks and scratches, whether they are caused by your cat performing mock bayonet charges or by the feet of your grand piano. The light coloring and intricate grain go well with most décor. Oak, particularly white oak, is more water-resistant than many other woods and is a good choice for flooring in danger of becoming wet, such as that of a kitchen. The density and durability of oak is almost as high as that of maple. Bamboo is surprisingly dense for its weight—nearly as dense as oak—and is environmentally friendly as well. Because it is a grass, bamboo grows to maturity in just four years, in contrast to the twenty years required for a tree to mature. Bamboo is golden-blonde in color, and blends in well with many color schemes. The Nails There are two main types of nails used in the hardwood flooring industry—L-shaped and T-shaped. While L-shaped nails are more commonly used, T-shaped nails offer more holding power. For a floor that will last as long as possible, choose the T-shaped nails. The Nailer There are two different types of nailers: pneumatic and hand-operated. The pneumatic nailer is the device you plug into the air compressor to speed up the nailing process. The hand nailer is generally battery powered. Because you will put your nailer under intense amounts of strain, you should use a high-quality, long-lasting product. Nailers constructed out of hardened steel tend to work best. You may want to consider getting a 3-in-1 combo nailer that is compatible with T-shaped nails, L-shaped nails, and flooring staples. The Air Compressor The air compressor is a very important part of the nailing process. It is what provides the firepower behind your nails, delivering approximately 100 pounds of force per square inch to smash the nails into the ground. It is recommended that you purchase a contractor-grade twin-cylinder air compressor for best results. Installing the flooring Once you have acquired these tools, the rest is easy. Measure the room(s) and add an additional 10 percent in square feet for wastage. Clean the floor thoroughly and mark the joists along the floor so that you can easily find them when you are nailing. Allow the wood to acclimatize for three days in the house before nailing. On the fourth day, roll out the vapor barrier and begin to lay...

read more

Skilled Machine Repair Technicians Always In Demand

Posted by on Oct 30, 2014 in Uncategorized | 0 comments

In the industrial and manufacturing industry, machines are arguably the most important asset a company can have. If your machines aren’t working, products aren’t being produced, and money is lost with every hour that the machines are down. Machine repair technicians play an important role in making sure that the machines of industry keep running smoothly: What does a machine repair technician do? Machine repair technicians maintain and repair the large machines used in the production of goods in manufacturing plants. Some work in independent industrial repair shops, while others are employed directly by a manufacturer and are a part of the industrial maintenance team that maintains and repairs the equipment used to make products. What skills does a machine repair technician need? Repair techs need to be very good problem solvers. Some problems may not have an obvious cause, and they’ll need to understand how a particular machine works in order to diagnose and repair the problem.  In order to become a machine repair technician, you may be required to learn very specialized skills, depending upon the types of machines you’ll be working with. For minor repair work and maintenance, you may not need a college degree, but you should have some hands-on experience with the machines that you will be repairing.  Consider starting out as a machine operator to familiarize yourself with the machines. If you want to work with more complex machinery, such as that which utilizes robotics or computer software, you need to know as much about each machine as possible. On-the-job training is not uncommon, but you may need to undertake formal training at a technical college or take some basic engineering classes to develop a better understanding of the technology you’ll be working with. Many of the manufacturers of the machines used in industry also offer training courses on the use and repair of the machines. These can be particularly useful if you want to specialize in repairing a certain type of machine. What are the job prospects for machine repair technicians? There is always a need for skilled repair technicians to keep machines running efficiently. Machines that don’t work properly can cost businesses a great deal of money in lost production, so some companies are willing to pay their own machine repair staff very good money to keep their skills updated and ensure that any non-working machines are repaired quickly. Pay varies greatly in this profession, with those who can repair more complicated machines often earning much more than those who simply maintain them. An average salary for an industrial maintenance technician journeyman is around $41,000, though this figure can be much higher if they have specialized skills which involve repairing robotic or computer integrated machinery. To find out more about a career in industrial repair, speak to your local technical college or talk to a representative from a business in the industry that you wish to work in. If you have other questions about industrial repair, try contacting a company like http://www.azsip.com with any questions or concerns you might...

read more

2 Things To Do Before Starting Outside Construction At Home

Posted by on Oct 30, 2014 in Uncategorized | 0 comments

Sure, you might be more than pumped about getting started on your next home improvement or renovation project. However, it is important to make sure that you are reviewing the following two things that should always be done first. This way, you will not automatically encounter too many problems throughout the process. Call About Locating Underground Utilities Whether there is it is a cable, phone, water, sewage, natural gas, or electrical line, you need to know that it is there and its exact location. Even if you are not sure that your property has any underground utility lines, you never know for sure until you make that phone call. Start by calling your electric company and ask about utility locating. If there is one telephone number where you can reach a professional, such as 1st Call Locating, that can locate all of your underground lines, the electric company will have it and provide you with it. Otherwise, you will have to take a moment out of your day to call all of the different utility companies. While it might seem like a pain, this is a very important step to take in order to prevent problems. The last thing you would want to do is to find yourself hitting and breaking through an electrical line with your shovel. You would cost yourself a lot of money in repairs, as well as injure yourself. Apply For A Building Permit Whether you are building a new addition or simply making some repairs to an already existing structure, it is important to make sure that you have obtained a building permit from your local town authorities. Without the proper permit in place, you might find your entire project to be shut down. You could also face a lot of money in various fines. All you have to do is to take a copy of your plans to the town hall and ask to apply for a building permit. Once you have turned in your application, it will be reviewed for approval. When it has been approved and you have received your paper copy of the building permit, you can begin to complete your work. As you can imagine, by remembering to follow these two steps, you will have a much easier time getting all of your work completed in a timely manner. So start making a few phone calls and get the process...

read more

Implementing LED Lighting Effectively

Posted by on Oct 29, 2014 in Uncategorized | 0 comments

LED bulbs have become a very widespread form of illumination for homes. They use much less energy than incandescent bulbs and can last much longer. They initially cost more, but they will save a business more money in the long-term. Also, they provide additional features that can be useful for the business, such as being dimmable and being able to use motion sensors. LED bulbs do not have mercury and they also provide light immediately. If you decide to switch to LED, however, there are a few things you should know. Look at the Label When looking for an LED bulb to replace a conventional bulb, look for an ENERGY STAR logo to make sure that it is rated to be as efficient as the current energy-efficiency standards. If the LED light is an ENERGY STAR and also is rated as being 60W, this means that it will provide the same amount of illumination as an incandescent bulb that is 60W. The lumens rating makes it much easier to choose the right bulb. The lumens are the standard for how much the bulb will be able to illuminate your home and all labels have had to list the lumens rating since 2012. Buy Them Carefully LED bulbs are expected to fall in price over time as more and more companies develop LED products and compete with one another. For this reason, you will want to buy your LED bulbs over time. Many experts believe that the LED bulbs will cost half of what they currently cost in a few years. To further save money, take advantage of rebates that might be provided by your state or utility company to encourage you to use LED lighting. Use Them in the Right Places One of the best places to replace incandescent bulbs with LED bulbs is in recessed lighting. These areas are used frequently and LED is well-suited for recessed lighting. Also, use LEDs for open fixtures such as table lamps and drop-bowl lighting. Open fixtures allow for air to circulate better, which can reduce the risk that the LED bulb will overheat. LED lights are well-suited for being used outdoors. For example, LED floodlights have become an increasingly more affordable option for illuminating the outside of your home. Be Careful with Enclosed Fixtures When using commercial LED bulbs in enclosed fixtures, make sure that the LED lights are intended for this purpose. Otherwise, multiple bulbs clustered together can cause the fixture to overheat and can both void your warranty and can create a fire...

read more

5 Questions You Might Have About Your Septic Tank

Posted by on Oct 29, 2014 in Uncategorized | 0 comments

Have you recently moved to a new home? Are you used to being hooked up to a sewer system, but your new residence has a septic tank? If this sounds like you, you may be interested in the following information about septic tanks and the septic tank cleaning process: How often do you need to clean a septic tank? Depending on the size of the tank and household usage, a typical tank needs to be pumped out approximately every 3 to 5 years. In order to prolong the time between cleanings, don’t flush anything “abnormal” down the drain. This includes things like cat litter, cigarette butts, sanitary napkins, and paper towels. These things will impede the functioning of the septic tank and require more frequent cleanings. Will the septic tank service need to drive over my nice lawn to access the tank? Most septic tank trucks have at least 200 feet of hose, allowing them to park in your driveway or alley and still access the septic tank. If your tank is further away or the tank lid is buried and you aren’t sure where the it’s actually located, let the service know this when you make the appointment. There may be an extra fee for locating the tank or for providing a longer hose.  How can you tell when a septic tank needs cleaning? If the area around the septic tank is soggy or your drains are starting to run sluggishly, this is a sign that your septic tank needs to be cleaned as soon as possible. You may also start to notice a sewage odor in the vicinity of the septic tank. How long does it take to clean a septic tank? Assuming nothing irregular happens, the average septic tank takes approximately 45 minutes to pump. If the tank is larger, the lid or lids need to be located, or a lid breaks during removal, the entire pumping process could take anywhere from an hour and a half to two hours. If the home has been vacant for months or years, the sludge may require more time to break up and remove. How can you tell if your septic tank needs to be replaced? A good septic tank service should inspect the tank after pumping, looking for visible cracks, roots, or tank warping. There may be an additional fee for this, depending on the service, but it’s worth the money to know whether or not your tank is still in good condition. Contact a group like Southern Sanitary Systems Inc. with more...

read more

Points To Consider When Debating A Change Of Heating Fuel Type

Posted by on Oct 29, 2014 in Uncategorized | 0 comments

One of the most confounding things that people have to deal with is what type of fuel they should use to heat their homes or businesses. People often come down to bickering over oil or propane for various reasons, but there are other options such as electricity and natural gas. Which one will work best for you? Permission to Make the Change Many people don’t have an immediate choice. If you rent a place, then you’re at the mercy of whichever heating solution is a part of the property. You can do things like bring in portable units, but other than that, you’ll have to accept it or convince the property owner to make a switch. For those whose heating system is nearing its end of life, you’ll have to make a decision. Keep the system, but service it Upgrade the same type of heating system Change your heating system for a different fuel type Keep it or Upgrade it If your heating system works fine for you, then you might as well keep it in place. Some maintenance can keep your burner going for a long time. If you’re unsure if there’s life left in it, you can order an energy audit or have a professional come take a look. This can help you decide if, Your burner needs an upgrade Your heating fuel isn’t as efficient as you’d like For example, if propane has worked for you through thick and thin, then you shouldn’t change. You may hear some benefits of heating oil and make the change. Then you find out that in your particular location, it would have been much better to just keep the propane. In the same scenario, you may find that your heating fuel works fine; it’s the burner that isn’t using it efficiently. In such a case, it has nothing to do with your fuel choice, but your equipment. There are frequent changes in equipment to make them more efficient so that they burn cleaner and deliver more BTUs per gallon. What about the Cost of Heating Fuels? The cost of fuels will fluctuate. It doesn’t matter if it’s propane, oil, electricity, or natural gas. Not only do prices fluctuate, they vary wildly from place to place. So making a decision based on heating fuel costs isn’t always the best way to go about it. If you look at fuel costs specifically in your locale, you may see a trend that can benefit you. However, where you need to really consider costs is in upgrades, swaps, or conversions to your current heating equipment. Adopting a new heating system can cost quite a bit. That means that you have to make absolutely sure that you’re doing the right thing for your home or other property. What you’re looking for is a system that will cost you less over time. Of course, those future benefits come with a steeper upfront cost. But if you can upgrade your current system to something more efficient, you can leave off wondering which heating fuel is the best. There’s really no best overall heating fuel, there’s only what heating fuel work best for...

read more

Learn How To Properly Care For Flame-Resistant Clothing

Posted by on Oct 28, 2014 in Uncategorized | 0 comments

Flame-resistant clothing is designed to protect you from being harmed, if you come into contact with a fire. You need to be sure that you properly maintain the clothing so that it can be as effective as possible though. Many people do not know how to properly clean their fire-resistant clothing and make the mistake of thinking it can be laundered the same way as any other piece of clothing. Use the following guide to learn how to properly launder this particular type of clothing to ensure it is always as useful as it can possibly be. Wash Alone – Wash the flame resistant-clothing by itself in the washing machine. Some clothing has dyes in them that can actually damage the material used in the clothing. Avoid Bleach – You do not want to use bleach or any detergent that has bleach in it when washing the clothing. The bleach will damage the protective luminescent fibers in the material and make it less resistant to fire. Avoid Fabric Softener – Fabric softeners should not be used when laundering fire-resistant clothing because it can damage the material. Many of the fabric softeners have oils in them that can create a fine layer on the material, which could take away from its flame resistance. Avoid the Dryer – You do want to dry the flame-resistant clothing too much. Take the clothing, hang it on a coat hanger, and then hang the hanger over your shower rod. This allows the clothing to dry on its own without being exposed to excessive heat. Do not hang the material outdoors as direct sun exposure could dry out the material as well. Avoid Bug Spray – Some bug sprays contain a chemical called DEET. DEET is very flammable, and spraying bug spray onto flame-resistant clothing will make it flammable. Spray bug spray directly onto your body before getting dressed and allow the spray to dry for ten minutes before putting on your clothing. This will ensure the spray has time to soak into your skin and not get into the material. You want your flame-resistant clothing to work as well as it can for as long as possible. If you take good care of your clothing and launder it properly, you can rest assured it works properly when you need it. Laundering the clothing at home instead of taking it to a dry cleaner will ensure it is cleaned properly and could save you money, as well. For more information, consult your local fire prevention professionals, like Ace Fire...

read more

Collecting Materials For Building Your Own Single Axle Trailer

Posted by on Oct 28, 2014 in Uncategorized | 0 comments

Whether you are constantly landscaping, always moving something, or in the habit of hauling farm supplies, one of the most useful things you can have in your possession is a trailer. A trailer that can be pulled behind your truck is the perfect way to add a bit more haul space to your vehicle. You could go out and spend several thousand dollars to obtain the right trailer for your needs. However, with just a bit of welding experience and access to the right materials, you can build a simple, single axle travel trailer for your everyday use. Finding the necessary materials may be easier than you think. Visit a Scrap or Salvage Yard One of the most vital components of the utility trailer is the axle that is used to initially build the frame upon. If you wanted, you could get a single axle by checking with a local metal or machine shop. However, in scrap and salvage yards, vehicle axles can be found in abundance and you can usually get them for a very good price. Just make sure that the axle you choose is free from damage as it is directly responsible for supporting weight and remaining stable when traveling. Keep in mind that different types of axles are designed to handle certain weight limits and therefore, you should make sure the axle you choose will be able to handle the weight of the trailer and any materials you plan to haul. Take a Trip To Your Local Steel Distributor When you take a look at the average utility trailer, you will see that it is basically created with steel. The steel beams that make up the frame, the steel liner that covers the bed, and even the angled steel that creates the tongue of the trailer can be found at one place. A local steel distributor like C & R Pipe & Steel will have everything you need to finish building your trailer. Most distributors can custom shape and mold steel pieces to accommodate your utility trailer plans. Steel can be bought in large sections and cut to your desired measurements or purchased pre-cut and ready for you to weld into place. Just by visiting a couple of local businesses, the salvage yard and local steel warehouse, you can gather the materials you need for your own utility trailer. Once you have all of the materials you need to build your single axle utility trailer, you will be ready to put your building plans into...

read more